CCM 5

Common name: Schoeps CCM 5

Production Status: In production

The CCM 5 is a compact small diaphragm multi pattern condenser microphone. It can be switched between omnidirectional and cardioid polar patterns. It has only one diaphragm and thus is a true pressure transducer in the omnidirectional position with a constant frequency response at all frequencies, low sensitivity to most wind and breath noise, handling noise and no proximity effect. Unlike conventional, dual-diaphragm multi-pattern microphones, its cardioid setting retains its full directionality even at very low frequencies. The CCM 5 has a gentle high frequency presence. It is ideal for vocals, spoken voices and acoustic instruments as a spot microphone in the cardioid position and for stereo recordings with coincident, ORTF and M/S setups. Matched pairs are available although normal production tolerances are very close. Custom colours are available on request. Each CCM microphone is available as a standard version “L” with a Lemo plug and as a version “U” with a permanently attached 5 m cable and XLR-3M connector.

Electrical Characteristics

Frequency Response
20Hz - 20 kHz
Output Sensitivity
11 mV/Pa
Max SPL
133
Max SPL, THD:
0.5
Self Noise (CCIR)
26 dB
Self Noise (DIN/IEC)
16 dB-A
Output Impedance
90Ω
Recommended Load
0.6kΩ
Powering
Phantom 12-48
Supply Current
4 mA
Alternative Powering

Switchable Options

Pad
Filter/EQ

Physical Characteristics

Connector
L-version: Lemo, U-version: XLR-3M
Connector notes
Available Colours
Matte Grey
Weight
41 g
Length
50 mm
Min diameter width
Max diameter
20 mm
Depth

Accessories

Included
SGC miniature swivel mount , L-version: adapter cable Lemo/XLR-3M
Optional
SGCM (metal version of the SGC). RL (350/700/1200) straight extension tube. STA stage stand. STV adjustable-height stand. RL S 250 LU gooseneck. S 250 L5U gooseneck. AF1 table top mounting adapter. F5 table mounting flange. TC miniature table stand. TC 2 double miniature table stand. Mini CCM LU RF miniature elastic suspension. HC3 miniature hanger for 3 mm cables. HC4 miniature hanger for 4 mm cable. S 170 L gooseneck. HSGMSC miniature cable hanger for M/S. SK 5 LU gooseneck cable. B 5 windshield. W 5 windshield. W 20 windshield. W20 R1 windshield. K 5 L-TA3 Lemo to mini jack cable. K 5 LU Lemo to XLR3-M cable. AK 2L/SU 2 Lemo to XLR-5M.