C5300 LB WLM
875 €Common name: Remic C5300 LB WLM
Production Status: In production
The C5300 LB WLM is based on the C5300 LB live model, but is supplied with a TA5M multi connector, which allows connecting the microphone to a variety of adapters for Shure and Sennheiser wireless systems as well as the standard XLR. The WL series has been designed to support wireless systems with unbalanced input circuits and a BIAS voltage of 3 to 8 volt. The microphone is available with or without a built-in windshield. The built-in windshield is designed to drastically reduce wind noise in open air performances. The windshield is placed inside the microphone and is therefore invisible and non-removable.
Electrical Characteristics
Frequency Response
10Hz - 22 kHz
Output Sensitivity
3 mV/Pa
Max SPL
Max SPL, THD:
Self Noise (CCIR)
dB
Self Noise (DIN/IEC)
dB-A
Output Impedance
-
Recommended Load
Powering
Phantom 9-52
Wireless Transmitter
Wireless Transmitter
Supply Current
2 mA
Alternative Powering
Switchable Options
Pad
Filter/EQ
Physical Characteristics
Connector
TA5M
Connector notes
Available Colours
Weight
8 g
Length
57 mm
Min diameter width
Max diameter
22 mm
Depth
37mm
Accessories
Included
Optional
RAD 001: adapter for XLR 48 volt phantom, REMIC studio/live models. RAD 001LB (adapter for XLR 48 volt phantom, REMIC loud live LB models). RAD 003: TRS 3.5 connector for Remic studio/live and Live mic to Sennheiser EW-series. (SK100G3/G4, SK300G3/G4, SK500G3/G4. Transmitter module 3.5 TRS w/screw lock connector). RAD 006: TA4 connector for Remic studio/live and Live to SHURE with TA4F connector (FP1, GLXD1, QLXD1, PG1, PGX1, PGXD1, SLX1, UC1, ULX1, ULXD1, UR1, UR1M, AD1). Transmitter module with TA4M connector. RAD 010: LEMO-3 connector for Remic studio/live and live microphones to SHURE (UR1M, AD1) and Sennheiser (SK2000, SK3063, SK5012, SK5212II, SK6000, SK9000). Transmitter modules with LEMO3 connector.