MK 290 E

Common name: Microtech Gefell MK 290 E

Production Status: In production

The MK 290 E is a selected pair of 1/2″ measuring microphone cartridges for sound intensity probes. The microphone cartridge has a fixed layer of back-electret to supply the polarisation voltage. The constructive design of the cartridge is equal to that of the MK 222 E. The equalisation of the static air pressure between the inside and outside of the cartridge is achieved by means of a capillary tube, adjusted for infrasonic measurements, rear-vented into the preamplifier. This enables the use of the optional TA 202 dehumidifier. The cartridge uses the international standard thread 60 UNS which ensures compatibility with a wide range of calibration equipment and measurement devices available from many manufacturers. Includes wooden box.

Electrical Characteristics

Frequency Response
0.5Hz - 20 kHz
Output Sensitivity
50 mV/Pa
Max SPL
146
Max SPL, THD:
3
Self Noise (CCIR)
dB
Self Noise (DIN/IEC)
15 dB-A
Output Impedance
-
Recommended Load
Powering
Other
Supply Current
mA
Alternative Powering

Switchable Options

Pad
Filter/EQ

Physical Characteristics

Connector
60 UNS 11.7 mm
Connector notes
Available Colours
Satin nickel.
Weight
9 g
Length
6.4 mm
Min diameter width
Max diameter
12.7 mm
Depth

Accessories

Included
Wooden box.
Optional
A 67 adapter for 1/4” microphone capsule, 1/4” MS302 measuring probe, WA 30 angle adapter 1/4”.