FMR720

Common name: Earthworks Audio FMR720

Production Status: In production

The Earthworks FMR720 FlexMic™ Series podium microphones are designed for permanent installation in podiums and other surfaces for speech applications. Optimised for speech, the FlexMic™ microphones feature a frequency response out to 20 kHz and excellent phase response that delivers high level of speech intelligibility and articulation. The near-perfect polar response of the FlexMics provides wide coverage and freedom of movement for the speaker. Whether speaking above, below or to either side of the microphone, every word is reproduced with clarity and intelligibility up to 90 degrees off-axis. This wider coverage also means that a single Earthworks microphone can be used to properly cover more than one speaker. With 32 dB or rear rejection, the FlexMic™ delivers more gain before feedback and exceptional isolation from unwanted sound sources. Ideal for civic, corporate, court, government or worship spaces. The FlexMic™ microphones feature a slim yet sturdy 7 mm gooseneck that stays put when adjusted, while providing low profile sight-lines. The gooseneck utilizes the latest in flex materials to virtually eliminate handling and movement noise. A metal mesh windscreen coupled with layers of foam prevent the loud pop inducing bursts of stop consonants from reaching the microphone. For outdoor events, an additional foam windscreen accessory (FMW2) is available to help eliminate noise from high mph winds. Optional PMM1 permanent mount accessory available separately. The FlexMic™ microphones are available in 13, 19, 23 and 27 inch lengths. Fully flexible and rigid center goosenecks are available. Available in cardioid or hypercardioid.

Electrical Characteristics

Frequency Response
20Hz - 20 kHz
Output Sensitivity
20 mV/Pa
Max SPL
139
Max SPL, THD:
3
Self Noise (CCIR)
dB
Self Noise (DIN/IEC)
16 dB-A
Output Impedance
-
Recommended Load
0.6kΩ
Powering
Phantom 48 only
Supply Current
10 mA
Alternative Powering

Switchable Options

Pad
Filter/EQ

Physical Characteristics

Connector
XLR-3M
Connector notes
Rigid center and flex at both ends.
Available Colours
Black
Weight
137 g
Length
67.6 mm
Min diameter width
Max diameter
8 mm
Depth

Accessories

Included
Optional
FMW2 Foam Windscreen. PPM1 Permanent Mount.