BSCS-L

452 €

Common name: Busman BSCS-L

Production Status: Discontinued / Vintage

The BSCS-L is a solid state Class A FET microphone with two separate large dual-membranes (1.07 inch) contained within a single housing. Its capsules are mounted in close proximity on a vertical axis. The upper capsule assembly has the ability to rotate 270 degrees horizontally, relative to the lower capsule. Also, there is a relative fixed position per interval of 30 degrees. Two three-way switches control the polar response, high-pass filtering and -10dB pad for each capsule.
The BSCS-L allows the user to achieve all manners of coincident pair stereophonic recording techniques. Due to the close proximity of the capsules, there is no phase cancellation resulting from time delay between the two signals. This translates into excellent mono compatibility. The BSCS-L is internally wired with Van den Hul cable. Includes 5-pin XLR cable, power supply, foam windscreen, special shock-mount and aluminium carrying case.

Electrical Characteristics

Frequency Response
20Hz - 20 kHz
Output Sensitivity
10 mV/Pa
Max SPL
138
Max SPL, THD:
1
Self Noise (CCIR)
dB
Self Noise (DIN/IEC)
15 dB-A
Output Impedance
200Ω
Recommended Load
Powering
Proprietary unit
Supply Current
mA
Alternative Powering

Switchable Options

Pad
Filter/EQ

Physical Characteristics

Connector
XLR-5M
Connector notes
Available Colours
Sierra yellow
Weight
Length
Min diameter width
Max diameter
Depth

Accessories

Included
PSU, foam windscreen, shock-mount, 5-pin XLR cable.
Optional