CK-40
599 €Primary use:
Type:
Polar patterns:
Common name: Avantone Pro CK-40
Production Status: In production
The Avantone CK-40 Stereo Class A FET microphone features twin LARGE 35mm centre-terminated pressure gradient transducers. Their close physical proximity places them in a tight vertical array to allow accurate stereo imaging without phase issues arising. The top capsule/grill assembly rotates UP TO 90 degrees relative to the lower capsule/grill assembly. This feature along with the multi-pattern independent selector choices allow for all stereo recording techniques to be utilised. (XY-Coincident / Blumlein, M-S). The 2 sets of pad, pattern select & LF rolloff switches independently control the capsules. (Front switches control the lower fixed grill/capsule while the rear switches control the upper rotating head grill.) The 3 patterns allow the CK-40 to be used in a variety of situations including M-S recording. The -10dB attenuation switch can be engaged when miking very high SPL sources to keep from overloading the electronics. The 80Hz HIGH-PASS filter switch can be engaged to reduce rumble and to keep unwanted low frequencies from “muddying up” the track. The CK-40 operates on standard 48 volt phantom power and includes a 5-Pin mic cable that plugs into the included 1×2 stereo splitter box. Two standard XLR mic cables are then all that is required to connect to a phantom powered mic preamp/console channel. The included Custom Retro Shock-mount allows for a precise positioning of the mic while inhibiting the transfer of unwanted vibrations up into the mic.