Micro HP
240 €Common name: Audix Micro HP
Production Status: In production
The Micro HP is a miniature electret cardioid condenser lug-mounted microphone. Primarily aimed at miking hand percussion instruments and drum instruments applications. Housed in an aluminium ring and isolated by means of a rubber shock mount system. The Micro HP attaches to the lug of an instrument via the Audix DCLAMP mounting system. A number of optional accessories are available which allow the Micro HP to be used on a mic stand or cymbal stand for a wider variety of applications. The Micro HP operates on phantom voltage of 9 – 52 Volts and is supplied with a phantom power adapter, 6’ integrated mic cable and carrying pouch.
Electrical Characteristics
Frequency Response
40Hz - 20 kHz
Output Sensitivity
6 mV/Pa
Max SPL
140
Max SPL, THD:
0.5
Self Noise (CCIR)
dB
Self Noise (DIN/IEC)
24 dB-A
Output Impedance
250Ω
Recommended Load
Powering
Phantom 12-48
Supply Current
mA
Alternative Powering
Switchable Options
Pad
Filter/EQ
Physical Characteristics
Connector
Mini XLR
Connector notes
Available Colours
Black
Weight
47 g
Length
30 mm
Min diameter width
Max diameter
12 mm
Depth
Accessories
Included
6’ attached shielded cable with mini XLRf connector. DCLAMPMICRO - Flexible mini-gooseneck lug clamp for drums, congas and percussion. Aluminum ring with rubber shock mount holder.APS910 - 48 V phantom power adapter. WS20 - External foam windscreen. P1 - Carrying pouch.
Optional
MCMICRO - Mic stand adapter. SMTMICRO - Optional mic stand adapter with rubber shock mount housed within an aluminium ring. DFLEXMICRO - Dual pivot arm and extra wide butterfly jaws. APS911 - Optional phantom power adapter. Runs on AA batteries when phantom power is not available. Features on/off switch and bass roll-off filter. DVICEMICRO - Optional flexible mini-gooseneck with spring-loaded rim mount clamp. Aluminium ring with rubber shock mount. MCSWIVEL - Shock mount adapter with ball and socket pivot.