AT2022
249 €Primary use:
Common name: Audio-Technica AT2022
Production Status: Discontinued / Vintage
The AT2022 is a permanently polarised stereo condenser microphone. The AT2022 features two unidirectional condenser capsules in an X/Y configuration pivot to allow for narrow (90°) or wide (120°) stereo operation. The capsules fold flat for storage. It is designed for general stereo recording and field sound capture. The AT2020 operates on batteries to allow use with most recording devices and features a switchable low frequency roll-off filter. The microphone comes equipped with a stand clamp, AA battery, fuzzy windscreen and 0.5 m (1.6′) long, 3 conductor, shielded, vinyl-jacketed stereo cable with 3-pin XLRF-type connector at microphone end and 3.5 mm (1/8″) TRS connector at output end.
Electrical Characteristics
Frequency Response
20Hz - 20 kHz
Output Sensitivity
8.9 mV/Pa
Max SPL
122
Max SPL, THD:
1
Self Noise (CCIR)
dB
Self Noise (DIN/IEC)
19 dB-A
Output Impedance
200Ω
Recommended Load
Powering
Internal battery
Supply Current
mA
Alternative Powering
Switchable Options
Pad
150Hz, 6dB/oct
Filter/EQ
HPF
Physical Characteristics
Connector
XLR-3M
Connector notes
0.5 m (1.6') long, 3 conductor, shielded, vinyl-jacketed stereo cable with 3-pin XLRF-type connector at microphone end and 3.5 mm (1/8") TRS connector at output end.
Available Colours
Weight
270 g
Length
192 mm
Min diameter width
21 mm
Max diameter
Depth
65mm
Accessories
Included
Stand clamp, AA battery, fuzzy windscreen and 0.5 m (1.6') long, 3 conductor, shielded, vinyl-jacketed stereo cable with 3-pin XLRF-type connector at microphone end and 3.5 mm (1/8") TRS connector at output end.
Optional