C 414 EB
Primary use:
Type:
Polar patterns:
Common name: AKG C 414 EB
Production Status: Discontinued / Vintage
Related Mics:
AKG C 414 B-TL II AKG C 414 B-ULS AKG C 414 XLII AKG C 414 XLS AKG C 414B-XLS AKG C 414B-XL II AKG C 414B-XLSThe 414 EB replaced the original C 414, changing the original CK12 capsule from Brass to Nylon and adding a 3-position attenuation switch (0,-10,-20 dB) and 3-position bass roll-off switch offering flat, 75 and 150 Hz settings with a 12 dB/octave slope. The XLR connector is now integrated into the all-metal housing of the microphone. The EB version was intended for 12 volts of Phantom Power while the EB – P48 was for standard Phantom Power. Includes W 26 foam windscreen, SA 18/3 metal stand adapter, and protective case. The data shown refers to the P-48 version.
Read more about AKG’s 414 series.
Electrical Characteristics
Frequency Response
20Hz - 20 kHz
Output Sensitivity
9 mV/Pa
Max SPL
140
Max SPL, THD:
0.5
Self Noise (CCIR)
dB
Self Noise (DIN/IEC)
18 dB-A
Output Impedance
200Ω
Recommended Load
0.5kΩ
Powering
Phantom 48 only
Phantom 12 only
Phantom 12 only
Supply Current
1 mA
Alternative Powering
Switchable Options
Pad
-10 dB, -20 dB
Filter/EQ
75 Hz, or 150 Hz, 12 dB/octave low-cut
Physical Characteristics
Connector
XLR-3M
Connector notes
Available Colours
Silver. Non-reflective black.
Weight
360 g
Length
141 mm
Min diameter width
Max diameter
45 mm
Depth
35mm
Accessories
Included
W 26 foam windscreen, SA 18/3 metal stand adapter, protective case.
Optional
H 17 A elastic suspension with windscreen, N 62 E power supply for two microphones, N 66 E power supply for six microphones.