RM2J Mark 2

3145 €

Common name: Horch RM2J Mark 2

Production Status: In production

The Horch RM2J Mark 2 has a number of improvements compared to the previous model RM2J. The sound selection switch, which is positioned at the front of the capsule head provides two different operation modes, the Linear mode and the Vocal mode. In Linear Mode, the polar patterns can be adjusted infinitely on the PSU between omni-directional, cardioid and figure eight. The microphone is very linear in this mode and is thus equally suitable for all recording situations. The Vocal Mode provides a special cardioid pattern with an even stronger proximity effect compared to the cardioid pattern in Linear Mode. The RM2J Mark 2 features the Horch Impedance Converter. The HIC increases both the sensitivity and the linearity of the microphone. The HORCH Impedance Converter can be bypassed internally to Pure Tube Mode completely removing the impedance converter from the signal flow. The RM2J Mark 2 then becomes 100% identical to the previous model, the RM2J.

Electrical Characteristics

Frequency Response
Hz - kHz
Output Sensitivity
mV/Pa
Max SPL
Max SPL, THD:
Self Noise (CCIR)
dB
Self Noise (DIN/IEC)
dB-A
Output Impedance
-
Recommended Load
Powering
Proprietary unit
Supply Current
mA
Alternative Powering
Tube Model
5654W

Switchable Options

Pad
Filter/EQ

Physical Characteristics

Connector
7-pin
Connector notes
Available Colours
Matte black
Weight
Length
Min diameter width
Max diameter
Depth

Accessories

Included
Power supply. Swivel mount. 7 Pin cable.
Optional
Tool ABS Case. Also available the "Vintage Set" which consists of a vintage style PSU and a nicely made wooden storage box.