TL 66
Primary use:
Polar patterns:
Common name: Pearl TL 66
Production Status: Discontinued / Vintage
The Pearl TL 66 is small diaphragm condenser microphone available with either a cardioid or an omni pattern. The output is transformerless and low noise. Used mono or as a stereo pair it is ideal for music and radio stations. A major strength is its very accurate reproduction of percussion instruments. The TL66K version has an omni pattern.
Electrical Characteristics
                                            Frequency Response
                                        
                                        
                                        80Hz - 14                                            kHz
                                        
                                    
                                            Output Sensitivity
                                        
                                        
                                            12 mV/Pa
                                        
                                    
                                            Max SPL
                                        
                                        
                                            132
                                        
                                    
                                            Max SPL, THD:
                                        
                                        
                                            0
                                        
                                    
                                            Self Noise (CCIR)
                                        
                                        
                                             dB
                                        
                                    
                                            Self Noise (DIN/IEC)
                                        
                                        
                                            18 dB-A
                                        
                                    
                                            Output Impedance
                                        
                                        
                                            -
                                        
                                    
                                            Recommended Load
                                        
                                        
                                            1kΩ
                                        
                                    
                                            Powering
                                        
                                        
                                            
                                                                                Phantom 48 only
								                                            
                                        
                                    
                                            Supply Current
                                        
                                        
                                            1 mA
                                        
                                    
                                            Alternative Powering
                                        
                                        
                                            30-48V phantom
                                        
                                    Switchable Options
                                            Pad
                                        
                                        
                                            Filter/EQ
                                        
                                        Physical Characteristics
                                            Connector
                                        
                                        
											                                            													XLR-3M												
                                        
                                    
                                            Connector notes
                                        
                                        
                                            Available Colours
                                        
                                        
                                            Black. Grey or  white on request
                                        
                                    
                                            Weight
                                        
                                        
                                            130 g
                                        
                                    
                                            Length
                                        
                                        
                                            116 mm
                                        
                                    
                                            Min diameter width
                                        
                                        
                                            21 mm
                                        
                                    
                                            Max diameter
                                        
                                        
                                            21 mm
                                        
                                    
                                            Depth
                                        
                                        Accessories
                                            Included
                                        
                                        
                                            Optional
                                        
                                        
                                            1820 stand adapter,1920 shockmount,1720 windscreen
                                        
                                    