CS1
Common name: Studio Project CS1
Production Status: In production
The CS1 is a large diaphragm (27 mm) studio microphone with a 6micron Mylar diaphragm. There is a FET impedance converter. The microphone has an extensive range of thumb-wheel selected filters and pads. These include four high-pass with 6dB/octave slope @ 50, 75, 150, or 300 Hz and four low-pass filters with 6dB/octave slope @ 3, 5, 7, or 15 kHz. The attenuation pad is selectable between -5, -10, -15 or -20 dB.
Electrical Characteristics
Frequency Response
20Hz - 20 kHz
Output Sensitivity
14 mV/Pa
Max SPL
134
Max SPL, THD:
1
Self Noise (CCIR)
dB
Self Noise (DIN/IEC)
10 dB-A
Output Impedance
20Ω
Recommended Load
1kΩ
Powering
Phantom 48 only
Supply Current
4 mA
Alternative Powering
Switchable Options
Pad
5, 10, 15, 20dB
Filter/EQ
50, 75, 150, 300Hz 6dB/oct
Physical Characteristics
Connector
XLR-3M
Connector notes
Available Colours
Silver
Weight
Length
215 mm
Min diameter width
Max diameter
52 mm
Depth
Accessories
Included
Shockmount, foam windscreen.
Optional